Shop headings: New Spares | Used Spares | Accessories | Brands
Original type clutch friction plate for big twins
2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub. Also known as Guzzi ref. 12084400
2 in stock
28084460-z 28084460 GU28084460 28 08 44 60
2808 4460 2808.4460 28.08.44.60
£52.00
INC VAT
£43.33 EX VAT
Clutch pushrod for RAM clutch which is 5mm longer than the standard version. This may be needed when fitting a RAM clutch kit to give extra room for adjustment
2 in stock
£37.30
INC VAT
£31.08 EX VAT
External clutch operating lever pivot for gearbox end cover
Superceded to Guzzi ref. 2A000384
1 in stock
95780271 GU95780271 95 78 02 71
9578 0271 9578.0271 95.78.02.71
£21.00
INC VAT
£17.50 EX VAT
Polished Tommaselli aluminium clutch lever
See CLA14605 for this lever in black finish
1 in stock
17605750-z 17605750 GU17605750 17 60 57 50
1760 5750 1760.5750 17.60.57.50
£37.00
INC VAT
£30.83 EX VAT
Clutch plate kit consisting of 2 x friction plates, 1 x intermediate plate, deep splined clutch centre / boss and tabbed lock washer (not shown). For models with the early type shallow spline plates this is a worthwhile upgrade kit to the better deep splined centre and plates. Clutch plate alignment tool also available, see TOA30510. Suitable for all 5 speed dual plate clutch models
Save £20 on the cost of these components if bought seperately. Does not include clutch springs (see CLA13100). Thicker side of each friction plate should face transmission
1 in stock
£186.50
INC VAT
£155.42 EX VAT
Tool for clutch centre gear nut
Half inch socket drive. This is a cheaper aftermarket tool- see TOA14903 for original factory item
1 in stock
14912603 GU14912603 14 91 26 03
1491 2603 1491.2603 14.91.26.03
£39.00
INC VAT
£32.50 EX VAT
Clutch cable with adjuster for gearbox end
Note this cable only has a barrel nipple at the gearbox end of the cable
1 in stock
17093002 GU17093002 17 09 30 02
1709 3002 1709.3002 17.09.30.02
£17.10
INC VAT
£14.25 EX VAT
Clutch cable without starter interlock switch
We advise you to measure your existing cable before ordering in case you have a non standard set up.
This part is due back in stock soon, call 01484 841395 to reserve yours
28093010 GU28093010 28 09 30 10
2809 3010 2809.3010 28.09.30.10
£19.00
INC VAT
£15.83 EX VAT
Clutch cable with starter interlock switch
We advise you to measure your existing cable before ordering in case you have a non standard set up.
This part is available by special order, request a quote
17093050-z 17093050 GU17093050 17 09 30 50
1709 3050 1709.3050 17.09.30.50
£75.00
INC VAT
£62.50 EX VAT
Clutch cable with adjuster for gearbox end
Suitable for all T3 and T4 models fitted with high bars
This part is due back in stock soon, call 01484 841395 to reserve yours
29093000-z 29093000 GU29093000 29 09 30 00
2909 3000 2909.3000 29.09.30.00
£21.00
INC VAT
£17.50 EX VAT